PROAIR PA600PLI
![](https://www.proair.ie/wp-content/uploads/2023/06/ProAir-PA600PLI.jpg)
PA600PLI – FOR A HEALTHY, COMFORTABLE AND ENERGY EFFICIENT PASSIVE HOME
The PA600PLI was designed specifically for the growing Passive and NZEB building market. Based on the flagship PA 600LI unit, our Passive House unit has a number of extra sensors to ensure the correct amount of control needed for a Passive House in order to achieve the required standards. The ProAir PA 600PLI achieved Passive House Certification in 2016.
Our experienced design team provides bespoke solutions for every customer. Highly skilled and nZEB qualified technicians install in compliance with the most up to date regulations and certification is received upon completion. Our Customer Care department will look after you for years to come.
Find out more about from our residential ventilation experts:
Benefits
Clean Fresh Air Continuously
Filtered fresh air is circulated throughout your home day and night. On average most people spend over 80% of their time indoors. 50% of all illnesses are either caused by, or aggravated by poor indoor air quality. The ProAir HRV System will continuously remove stale moist air from your home creating a more suitable and healthy place to live.
Energy Efficient Ventilation
A Heat Recovery Ventilation system will save you money and reduce your energy requirements for heating by re-using the heat that is normally lost through poor construction. A Heat Recovery Ventilation system is also designed to operate continuously at a low rate to minimise the electrical energy consumption.
Condensation Elimination
All water vapour will be removed as it is produced. As a result there is no moisture condensation which causes rot, damp, condensation or mould growth.
Comfort
Comfort levels are superior in a house fitted with a Heat Recovery Ventilation system/unit. Irrespective of weather conditions, draught free balanced ventilation is provided all the time.
Features
Features Summary
- This Heat Recovery Ventilation unit is best located within the thermal envelope of the house. It can be placed at high level in say a utility room or hotpress in order to save on floor space. If this is not an option it may be placed in the attic.
- Expanded polyethylene casing to ensure high levels of insulation.
- High efficiency pure polystyrene counter-flow plate exchanger.
- Touch Screen Controller
- Low energy EC motors.
- Totally silent operation.
- G4 high grade filters. Other levels available.
- Passive House Institute Certified Component
- Environmental Product Declaration (EPD) – ‘cradle to grave’, and Module D – listed HERE on EPD Ireland and available to DOWNLOAD HERE
DATASHEET
Datasheet Summary
- Heat Recovery Ventilation unit suitable for residential and small commercial.
- Heat Exchanger: Counter-flow pure polystyrene 0.02mm plates
- Fans: R3G190 Backward curved impellors, 2 of.
- AHU body: Expanded polyethylene.
- Filters: G4 Panels on supply and extract.
- Control: 0-10v input variable speed, with timed boost over-ride.
- Max Airflow: 380 m3/hr.
- Passive House Institute Certified Component
- Contact sales@proair.ie for a technical datasheet